Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

DAESSY Mounts

DAESSY Mounting System
Wheelchair mounting for environment control devices, tablets, iPads and laptops

The DAESSY Mounting System is a component based system that allows for customization and limitless configurations to meet mounting needs.

The core elements of the DAESSY Mounting System are the Standard DAESSY Wheelchair Mounts, the Desk Mounts and DAESSY Rolling Mounts. These mounts are available in a standard configuration, or can be modified with common variations, component substitutions or additions for more customisation at the user level.

The DAESSY Mounting System Components can be purchased individually to build sturdy and adjustable structures for mounting items on walls, bedframes, floors etc. The Mounting System Components can be combined with the DAESSY Stem System for Switch Mounting. The possibilities are unlimited.

Visit DAEDALUS on the web for detailed descriptions of the wide range of components then send us your 'wish list' for a quote. DAESSY Mounting System Components


Here are just a few examples of  the many DAESSY Mount options

DAESSY Rigid Mount DRM1

Rigid Mount DRM1

The DAESSY Rigid Mount (DRM1) provides a simple but highly adaptable and adjustable support structure for Mounting laptop computers or communication devices on wheelchairs. The Mount consists of two lengths of tube Rigidly connected to form a right angle structure. The Mounted device is attached to a horizontal tube crossing the wheelchair and supported by a vertical tube in a clamp that is permanently attached to the wheelchair. Both left or right-hand Mounting are possible and the Mount can be precisely positioned for accessibility by the user. The device may be quickly detached from the Mount, and to allow unimpeded access to the user the Mount may be lifted up completely out of the frame clamp or it may slightly lifted and swung to the side. All common wheelchair frame tube sizes, shapes and orientations can be accommodated. Variations can be made in the length and shape of the tubes, and in the other parts, to adapt the Rigid Mount to any wheelchair.


DAESSY Rigid Mount ROP Version DRM1ROP

Rigid Mount ROP Version DRM1ROP

The Rigid Mount ROP Version is similar to the standard Rigid Mount, but is connected to the wheelchair with a Removable Frame Clamp Assembly. The Removable Outer Piece and Receiver (ROP & RFCR) that allow the Mount assembly to be locked in place replace the standard Outer Piece and Index Clamp (UFCOP & IC1). The ROP Version allows for attachment to Tilting Seat Systems and installation beyond 15° from vertical. Additionally the mount can be quickly removed from the wheelchair. This Mount is non-directional and can be attached to either side of the wheelchair with the same components.

 


Folding Mount DFM2

The DAESSY Folding Mount (DFM2) as the name implies can be folded away from the user. The two tubes of the Mount are connected by a flexible joint and except for this feature it is identical to the Rigid Mount. The flexible joint allows the horizontal tube, with the device attached or removed, to be lifted up to the side until the two tubes are parallel in a straight-up orientation and then rotated down until parallel to the vertical tube alongside the wheelchair. When folded and removed from the wheelchair the Folding Mount forms a more compact structure than the Rigid Mount.(not shown)


DAESSY Folding Mount ROP Version DFM2ROP

Folding Mount ROP Version DFM2ROP

The DAESSY Folding Mount ROP Version DFM2ROP is functionally identical to the standard DAESSY Folding Mount. The ROP Version allows for attachment to Tilting Seat Systems and installation beyond 15° from vertical. The Removable Outer Piece and Receiver that allows the Mount assembly to be ‘locked’ in place replace the standard Outer Piece and Index Clamp and allow the Mount to be quickly removed from the wheelchair. This Mount is non-directional and can be attached to either side of the wheelchair with the same components.

 

 

 


DAESSY Swing Aside Mount DSAM4

Swing Aside Mount DSAM4

The Swing Aside Mount combines the features of the original Locking Swing Away Mount (DLSA7) with the lockable frame clamp components ROP-RFCR for use on a tilt seat system. The mount can be swung away from the user by releasing the lock-pin connected to the cable that runs below the horizontal tube. The attached device or computer is connected to the horizontal tube across the wheelchair and supported by a vertical s-bend tube held in a frame clamp that is permanently attached to the wheelchair. Either left or right side installation is possible. The device may be quickly detached from the mount and the mount may be lifted completely out of the frame clamp. All common wheelchair frame tube sizes, shapes and orientations can be accommodated. Variations can be made in the length and shape of the vertical side tube, and in the frame clamp parts to adapt the mount for any wheelchair.

 


Visit DAEDALUS on the web for detailed descriptions of the wide range of components then send us your 'wish list' for a quote. DAESSY Mounting System Components